Configuring Landing Page¶
This page describes how to configure a Landing Page in Unified Monitoring.
Prerequisites¶
Before configuring a Landing Page, make sure that:
You have the required permissions for assets, operations, and menu groups. Contact the application administrator to acquire the required permissions.
You have registered the attributes, measurement points, and metrics of related assets in Common Data Service. For more information, see About EnOS Common Data Service.
You have published the configured DTV page and acquired the URL of the page. For more information, see Publishing Dashboard Pages.
If you need to use the filters of Landing Page, make sure you have add output parameters to global filters in Digital Twin Visualization. For more information, see Landing Page Output Parameters.
If you need to synchronize widget templates from Digital Twin Visualization to Unified Monitoring, You need to add tags for the templates to be synchronized. For more information, see Widget Template.
If you need to link multiple Digital Twin Visualization pages, make sure you have added related assets and attributes in EnOS Management Console > Model and configured enumerated values for attributes in Asset Tree.
Configuring Page Functions¶
Select Landing Page from the left navigation bar.
Note
The menu name in your applications might be different from the name in this article, because of the customization on menu names for Unified Monitoring pages. Contact your application administrators for more information.
Configure the following information on the Basic Settings tab.
Field
Description
Example
Show Title
Display the page title in the upper left corner of the page. When enabled, you can customize page title in the Title bar. You can enter
${nodeName}
to refer to the current region or site, or the${userName}
parameter to refer to the current user name.For example, if the name of the current site is
Wind Site-1
, when you enter${nodeName} Overview
in the Title bar, the title displayed on Landing Page isWind Site-1 Overview
.Theme
Specify the theme of Landing Page, supporting
Match Application Portal Theme
,Black
,Green
, andWhite
.If you select
Match Application Portal Theme
, Landing Page applies the same them you used in Application Portal.Template Management
Enable the function to manage the templates of the Landing Page.
For more information about landing page templates, see Managing Templates.
On the Asset Settings tab, turn on the Asset Settings toggle to configure the following information.
Field
Description
Example
Available Dimension
Asset dimensions supported by the Landing Page. You can select
Site and Above
orSite and Device
. If you selectSite and Above
, you can specify the dimensions supported by Landing Page in Group ByTo display data of multiple sites, select
Site and Above
. To display data of a specific site and the devices there, selectSite and Device
.Asset Type
Specify the asset type displayed on Landing Page. If you select multiple asset types, you can drag the sorting icon on the left of each asset type to sort the display order.
For example, to display wind, hydro, and solar sites in turn, you can select
Wind
,Hydro
andSolar
from the dropdown list, and adjust the display order toWind-Hydro-Solar
.Asset Type Filter
Allow application users to specify the types of assets displayed on the page.
For more information, see Filtering Data by Asset.
Grouping Filter
Allow application users to specify the asset scope displayed on the page (including group, region, and site). You need to select the
Site and Above
for the and configure Grouping at first.For more information, see Filtering Data by Asset.
Site Filter
Allow application users to filter the sites, device, and related data on Landing Page. You can specify whether application users can select multiple sites at the same time in Selection Method.
For more information, see Filtering Data by Asset.
Synchronize Assets
Automatically select the assets selected in the current Landing Page when opening a new page.
For example, you select Turbine-1 and Turbine-2 on Landing Page, when you open a Landing Page page, the new page displays the asset data of Turbine-1 and Turbine-2 by default.
On the Time Settings tab, turn on the Time Settings switch to configure the following information.
Field
Description
Example
Time Interval Filter
Specify the time interval in the Time Range Filter. You can select
Day
,Month
orYear
and configure the default interval.For more information, see Filtering Data by Time.
Time Range Filter
Allow application users to filter the data of a specific time period.
For more information, see Filtering Data by Time.
Time Format
Specify time format, supporting
YYYY-MM-DD
andYYYY-MM-DD HH:mm:ss
.To make the time shown on Landing Page with precision down to second, select
YYYY-MM-DD HH:mm:ss
, down to year, selectYYYY-MM-DD
.Selector Type
Configure whether
Time Point
orTime Range
is shown in filters.Select
Time Point
, and application users can only select a specific date, month, or year in time range filters (depending on the Time Interval configuration). SelectTime Range
, and application users can select a period of time in time range filters.Earliest Available Time
Specify the earliest time available in time range filters. You can select
No Limit
,Absolute Time
(specify a time directly) orRelative Time
(specify a time based on the current time).For example, to set the earliest available time at 60 days ago, you can select
Absolute Time
then select a date 60 days prior, or selectRelative Time
and configure it to60 | days
.Latest Available Time
Specify the latest time available in time range filters. You can select
No Limit
,Absolute Time
(specify a date based on the current time) orRelative Time
(specify a date based on the current time).For example, to set the latest available time at one month later, you can select
Absolute Time
then select a date one month later, or selectRelative Time
and configure it to1 | month
.Time Shortcut
Display time shortcut button next to the time interval filter.
Application users can select the time shortcut button to quickly apply a specific time range.
Turn on the Control Settings toggle on the Control Settings tab. Application users can select the Control button in the Landing Page to open the control panel.
Configure the following information on the Link Settings tab.
Field
Description
Example
Page Source
Select a page source for the Landing Page. You can select
DTV
orOthers
.If the page is from the DTV metric page or monitoring page, select
DTV
; otherwise selectOthers
.Link Type
Select a link type for the DTV page. You can select
By Single URL
orBy Attributes
.By Single URL
only supports the link of a single DTV page, whileBy Attributes
can be used to link multiple DTV pages.URL Address
When
Others
is selected as the page source orBy Single URL
is selected as the DTV link type, enter the URL of the page to be linked.For example, if the URL of the page is
{domain-name}/dt/encompass/page/2fe2ca90-c60b-46ba-ba77
,/dt/encompass/page/2fe2ca90-c60b-46ba-ba77
must be entered here.Select an Attribute
Specify the page attribute based on which multiple DTV pages are linked, then configure link condition, page name, and URL address in the URL Address table below. The attributes here inherits the asset attributes in EnOS Management Console > Asset Tree. When a enumerated value of the asset attribute matches the link condition, application users can view the corresponding page after selecting the asset. If a enumerated value matches multiple link conditions, application users can switch to the corresponding page by selecting the tab on Landing Page.
For example, if you have
Site Status
attribute andWind Site-1
asset, and enumerated values1
and2
are configured as the site status of Wind Site-1 in EnOS Management Console > Asset Tree, application users can view the pages with Condition1
and2
after selectingWind Site-1
in the Landing Page.Select Publish. In the popup window, enter the description on the Remark text box and select OK.
Note
When linking multiple pages, make sure the attribute type is array if you want to configure page names. Otherwise, the page name is the values of Condition.
Managing Widgets¶
You can add or edit the visualized DTV widgets in Landing Page. For more information about configuring visualized widgets, see Adding Widget.
Adding Widget Templates¶
Select Landing Page from the left navigation pane.
Note
The menu name in your applications might be different from the name in this article, because of the customization on menu names for Unified Monitoring pages. Contact the application administrator for more information.
Select the Add Widget button, select the widget template you want to add to the page from the popup window and select Add to Page.
Configuring Widget¶
Select Landing Page from the left navigation pane.
Hover over the ellipsis (…) of the widget you want to edit and select Edit to open the Widget Editor page.
In the Widget Editor page, you can edit widget information such as basic information, data fields, style settings, and filters. For more information about editing widgets in Widget Editor, see Widget.
(Optional) To save the configured widget for future use, select Save as Template, enter the project, name, and tag information in the popup window and select OK to save the configured widget as a template.
Select Update and select Save on Page Editor.
Managing Templates¶
The templates of Landing Page contains multiple configuration items such as:
Asset scope
Widget and function configuration
Page layout
Note
You can only save Digital Twin Visualization (DTV) pages as templates.
Saving or Updating a Template¶
Save the current report configuration as a template or update the configuration of an existing template by the following steps:
Select Landing Page from the left navigation pane.
Hover over the setting button and select Save Template from the dropdown list.
Enter the following information on the popup window.
Field
Description
Template Name
Enter the name of the template.
Template Description
Enter the description of the template.
Save Time Interval and Scope
Save the current configuration of time interval and time scope into the template.
Save as OU Default View
Display the template as the Metric Inquiry Report when opening the Landing Page page.
Select OK.
Saving the Modified Template as a New Template¶
If you have applied a template to the current page and modified the template configuration, save the modified template as a new template by the following steps:
Select Landing Page from the left navigation pane.
Hover over the setting button and select Save as Template from the dropdown list.
Enter the following information on the popup window.
Field
Description
Template Name
Enter the name of the template.
Template Description
Enter the description of the template.
Save Time Interval and Scope
Save the current configuration of time interval and time scope into the template.
Save as OU Default View
Display the template as the Metric Inquiry Report when opening the Landing Page page.
Select OK.
Editing a Template¶
Select Landing Page from the left navigation pane.
Select Templates.
Hover over the card of the target template and select the edit icon .
Edit the name, description, and category of the template in the popup window and select OK.
Deleting a Template¶
Resetting Page Configuration¶
If you want to undo all editing operations performed in the Landing Page module, reset the page configuration to the state when publishing the related DTV page by the following steps:
Restoring History Versions¶
You can view the information about history versions such as version numbers, the users to publish versions, the publishing time of versions, and publishing remarks.If you want to use a history version of Landing Page, restore the version by the following steps:
Importing or Exporting Pages¶
You can export the following contents of Landing Page in JSON format and import the JSON file to migrate and reuse the configured page:
Page Function Configuration
Asset and Data Fields Settings