• Documentation
• Cartesian Coordinate System Chart

Cartesian Coordinate System Chart

Cartesian coordinate system chart now supports the following types of charts:

• Boxplot Chart: display a statistical chart of a set of data dispersion information. It is mainly used to show the data distribution, and also allows comparison of multiple data distribution groups.

• Scatter Chart: display discrete or extreme data points.

• Bar Chart: display the quantity or frequency distribution of data.

• Dot-Line Chart: display the relationship and distribution between variables.

• Area Chart: display the trend of data changes over time or other continuous variables.

• Line Chart: display the trend of data changes over time, sequence, or other continuous variables.

• Target Chart: display the actual and target values of the indicators, and compare the differences between the actual and target values.

Data Fields

The data fields required are:

Field	Quantity
Dimension	1 - 2
Comparison	0 - 1
Measurement	Unlimited. The recommended number of boxplot chart is 5.
Extension	Unlimited

The Comparison data field enables you to segregate the data by their Comparison value and plot them as multiple charts on the widget. For example, the chart below shows how the data is separated into Measurement_A and Measurement_B.

You can also show/hide the charts according to their measurement data fields or comparison value by clicking their respective legend labels.

Chart Style

Set the style of the Cartesian Coordinate System Chart and match the data fields.

Field	Description
Layout	Set the chart orientation to vertical or horizontal. The main function is with the box line direction of the boxplot chart. When the boxplot is horizontal, the X-axis and Y-axis settings will be swapped.
Series	Select + Add and specify the name, type, and measurement data fields for the series.

Series Style

After adding series, you need to configure the style information of the series in the corresponding configuration section.

Boxplot

Field	Description
Maximum Value	Select a measurement data field as the maximum value of the chart.
Minimum Value	Select a measurement data field as the minimum value of the chart.
Median Value	Select a measurement data field as the median value of the chart.
Upper Quarter Value	Select a measurement data field as the upper quarter value of the chart.
Lower Quarter Value	Select a measurement data field as the lower quarter value of the chart.
Box Background	Specify the filling color of the boxes on the chart.
Border	Specify the color and width of the box borders on the chart.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Scatter

Field	Description
Color	Specify the color of the scatters on the chart.
Scatter Size	Specify the size of the scatters on the chart.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Bar

Field	Description
Color	Specify the color of the bars on the chart.
Bar Spacing	Specify the spacing between each bar on the chart.
Rounded Corner	Once enabled, the bars will be rounded rectangles.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Dot-Line

Field	Description
Color	Specify the color of the lines on the chart.
Line Type	Specify the type of lines on the chart.
Line Width	Specify the width of lines on the chart.
Smooth	Once enabled, the lines will be displayed as smooth curves.
Size	Specify the size of dots on the chart.
Shape	Specify the shape of dots on the chart, such as dot, diamond, arrow, and triangle.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Area

Field	Description
Area Color	Specify the filling color of the areas on the chart.
Line Color	Specify the color of the area borders on the chart.
Line Width	Specify the width of area borders on the chart.
Smooth	Once enabled, the area borders will be displayed as smooth curves.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Line

Field	Description
Color	Specify the color of the lines on the chart.
Line Type	Specify the type of lines on the chart.
Line Width	Specify the width of lines on the chart.
Smooth	Once enabled, the lines will be displayed as smooth curves.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Target

Field	Description
Color	Specify the color of the target lines on the chart.
Target Height	Specify the height of the target lines on the chart.
Match Secondary Y-Axis	Once enabled, the data on the chart will be matched to the secondary Y-axis.
Decimal Places	Round up the values to the selected number of decimal places, supporting 0 to 3 places.
Enable Future Style	Once enabled, a special future data style will be applied to the data whose time is in the future to help users distinguish it from other data.
Comparison	Once enabled, the measurement data fields will be compared based on the comparison data field.

Axis Style

Field	Description
Name	Specify the name or unit of the axes.
Label Length [1]	Specify the length of the axis label name. When the length is longer than the set length, the excess will be displayed as an ellipsis (…). Or you can select Auto, where the adjacent label names will not be displayed if a label is too long.
Dynamic Unit [2]	Select this to automatically use the suitable unit for your data values, and to automatically adjust the values on the axes.
Axis Range [2]	Specify the minimum and maximum values on the axes, and the number of labels between them.
Axis Font	Style the axis name font.
Unit Font	Style the unit name font.
Axis Line	Style the line for the axes.
Grid Line	Style the grid lines for the axes.
Show Scalar Bar	Select to show a bar that can limit the range of data displayed on the axes.

[1] Only available for X-Axis.

[2] Only available for Y-Axis.

Other Settings

Legend

Formats the legend. You can hide the legend by clicking preview button .

Field	Description
Position	Select the position of the legend.
Size	Specify the radii of the legend dots and the vertical spacing between them. Select Auto to automatically set the optimal size for the legend bar.
Legend Font	Style the text labels in the legend.

Annotation

Different types of markers can be added: reference line, mark and highlight area.

Reference Line

Field	Description
Data Field	Specify the data field you wish to add the reference line in.
Type	Select the type of reference line. Maximum Minimum Average Median Custom Fixed Numeric Value: Specify an unique reference value. Empty by default. Parameters Expression: Specify dynamic parameters to be used as the reference value. Empty by default.
Line Format	Style the line.
Font	Style the marked value.

Mark

Data Field	Specify the data field you wish to add the mark in.
Type	Select the type of mark. Maximum Minimum
Color	Select the color of mark.
Size	Set the size of the mark.
Shape	Set the shape of the mark.
Font	Style the marked value.

Highlight Area

Field	Description
Linked Axis	Select the axis of highlight areas. You can: Select X-Axis to display highlight areas vertically. Select Y-Axis to display highlight areas horizontally.
Data Field	Specify the data field of highlight areas. You need to add related fields to Data Fields > Extension first.
Identification Method	Specify the condition format of highlight areas. Sections that meet the specified conditions are highlighted in mix charts. You can choose the following identification methods: Matching: highlight the background areas of objects with the specified value. Value Range: highlight the background areas of objects within the specified value range.
Formatting Rules	Specify the rules to highlight, including values or value ranges, displayed text, and highlight colors.