Creating a Product


This secion shows how to create a product. Any device that connects to EnOS Cloud must have an identity on the platform to perform data interaction with the cloud normally. The device can be registered in the cloud in dynamic mode or static mode. Both of these modes require the device to have the productKey issued by the cloud.

Prerequisite

  • Ensure that you have obtained the Create permission for the Product service. If not, contact your OU administrator.

  • Ensure that the model corresponding to this product has been created. For information on how to create a model, see Creating a Model.

  • Ensure that you have read the limitations for products. See Limitations.

Step 1: Creating a Product

  1. In EnOS Management Console, select Device Management > Products.

  2. Click the New Product button and complete the following on the New Product pop-up window.

    • Product Name: The name of the product, unique within the same OU.

    • Asset Type: Defines the asset type of the product.

      • Device: There are no sub-devices that needs to be connected.

      • Gateway: Needs to connect to sub-devices.

    • Model: The model that the product will be under.

    • Onboarding Method: The method by which devices onboard to EnOS.

      • Only EnOS IoT: Via EnOS standard JSON data.

      • EnOS IoT and Custom: Via custom data format such as binary data that can be parsed in EnOS using data parsing scripts to encode/decode upstream/downstream data, or via third-party device protocols that can be converted to EnOS standard protocol using protocol gateways.


    • Protocol Gateway

      • If Only EnOS IoT is chosen for Onboarding Method: EnOS IoT protocol gateway, the default protocol gateway used in EnOS, will be automatically assigned.

      • If EnOS IoT and Custom is chosen for Onboarding Method, select an option as per the below.

        • Disabled: You need to create a custom data parsing script in the product to encode and decode the uplink and downlink data. For more information, see Parsing Custom Format Data.

        • Enabled: Select a protocol gateway from the drop-down list. The protocol gateways in the list are the protocol gateways from Private Gateways in Device Onboarding > Protocol Gateways, which can be created from scratch or based on a template in Public Gateways. If the protocol gateway has not been created, select None (to be created) first. You can update the it later when you have created the protocol gateway. For more information, see Protocol Gateways.


    • Certificate-based Authentication: Choose whether to enable the Certificate-based bi-directional authentication method for this product. If enabled, data will be encrypted and decrypted through the CA certificate for a more secure communication between the device and the cloud

    • Description: The description of the product.


  3. Click OK to create the product.


../../_images/create_new_product.png

Step 2: (Optional) Adding a Tag

A tag describes the common information shared by products of the same type.

  1. From the list of created products, find the target product and click View btn_view.

  2. Under the Basic Information tab, click Edit in the Tags section.

  3. On the pop-up window, click New tag, and enter the key-value pair (key:value) for the new tag.

  4. Click OK to save the tag.

Results

When the product is created, you will get a pair of credentials: the product key (productKey) and product secret (productSecret). This pair of credentials uniquely identifies the product and is the key to the device registration and product information modification for this product. The product secret credentials will be used for activating the device. For more information, see Device and Cloud Security.

Follow-up Operations

If you select Custom for the Data Type field, you will need to upload the data parsing script. For more information, see Creating Data Parsing Script.