Quickly Controlling Sites and Devices¶
Fleet Control allows users to quickly open the control panel in the device list and site list and issue control commands.
Prerequisites¶
Before starting, make sure the current account has been assigned the required asset permissions, operation permissions, and menu groups including Site Control and Batch Control. If not assigned, contact the application administrator.
Quickly Controlling Sites¶
Procedure¶
Log in to EnOS Application Portal, and select Fleet Control in the application list.
Select Site Control in the left navigation bar, and then select the target Site in Asset Range Filter.
Click Control on the right side of the target site to enter the site control panel. The control panel displays the control commands of the current device type in list form on the right.
Select the target control command to do the following:
Telecontrol: Select the control value in the drop-down box, such as on-grid, off-grid, switch on, and switch off.
Teleadjusting: Enter the control value in the input box, such as active power setting and reactive power setting.
Click Execute to issue the control command.
Results¶
After the control is executed, query the operation results through the batch control result pop-up window.
Query the device list for the corresponding result on the Execution Succeeded, Execution Failed, and In Progress tabs.
Query the Control Object, Status, Control Point, Value, and other information about the target control command.
Quickly Controlling Devices¶
Procedure¶
Log in to EnOS Application Portal, and select Fleet Control in the application list.
Select Batch Control in the left navigation bar, and then select the target Site and Device in Asset Range Filter.
Click Control on the right side of the target device to enter the device control panel. The control panel displays the control commands supported by the current device in list form.
Select the target control command to do the following.
Telecontrol: Select the control value in the drop-down box, such as on-grid, off-grid, switch on, and switch off.
Teleadjusting: Enter the control value in the input box, such as active power setting and reactive power setting.
Click Execute to issue the control command.
Note
While a control command is being executed, the control panel will be locked automatically and the selected command cannot be operated.
Results¶
After control execution is complete, view the latest control command execution time, operation results and other information in Last Command of the control panel.