Controlling Devices in Batch¶

Fleet Control allows users to issue control commands through the batch control panel to control multiple devices in batch.

Prerequisites¶

Before starting, make sure the current account has been assigned the required asset permissions, operation permissions, and menu groups including Batch Control. If not assigned, contact the application administrator.

Procedure¶

Log in to EnOS Application Portal, and select Fleet Control in the application list.
Select Batch Control in the left navigation bar, and then select the target Site and Device in Asset Range Filter.
Click the Batch Control button .
A check box appears in front of the device list. Select the devices that need to be controlled in batch, and click Control on right to bring up the batch control panel.
The batch control panel displays the control commands for the selected device type or model in list form on the right side.
Select the target control command to perform the following operations.
- Telecontrol: Select the control value in the drop-down box, such as on-grid, off-grid, switch on, and switch off.
- Teleadjusting: Enter the control value in the input box, such as active power setting and reactive power setting.
Click Execute to issue the control command.

Results¶

After control execution is complete, query the operation results through the pop-up window of batch control results.

Query the device list for the corresponding result on the Control Succeeded and Control Failed tabs.
Query the control Object, Status, Control Point, Value, and other information about the target control command.

If the operation result is Control Failed.

Select the Control Failed tab in the pop-up window of batch control results, and then click the Retry button in the lower right corner to retry the failed control commands.
Do Retry in the control log. For more information, see Control Log.